STERIPleat Vent – Sterile tank vent filtration

STERIPleat Vent filters use a hydrophobic PTFE membrane for the removal/reduction of bacteria in tank venting and gas filtration applications. These filters can be used with our STERALine filter housing range to provide a compressed gas or atmospheric venting solution. STERIPleat Vent filter cartridges can also be used for sterile gas filtration.

  • Specifications
  • Downloads
Applications
Sterile tank venting
Gas filtration – CO2, N2, Air
Media grades
S = Standard grade
P = Integrity test grade
Micron ratings
0.1, 0.2, 0.45, 1μm
Available lengths
Standard cartridge: 5”, 10”, 20”, 30”, 40” (124/143, 256, 503, 750, 997mm)
Junior cartridge: 2”, 5” (64, 122mm)
Outer diameter
Standard cartridge: 68.50mm
Junior cartridge: 56mm
Typical filtration area
Standard cartridge: 0.75m2 per 254mm (10” element)
Junior cartridge: 0.25m2 per 122mm (5” element)
Materials
Filtration media: Hydrophobic PTFE membrane
Support & drainage layer: Polypropylene
Core, cage & end fittings: Polypropylene (Optional reinforced PP end caps for sterilisation/sanitisation)
Gaskets & O-Rings: Ethylene Propylene , FEP encapsulated, Silicone, Viton, Nitrile, PTFE (DOE only)
Max. operating temperature
60°C (Short term use 80°C )
Sterilisation
Steam or autoclave: 135°C for 30mins (150 cycles)
Hot water sanitisation: 90°C for 30mins
Material compliance
FDA approved components
USP Class VI-121ºC Plastics Test
BSE/TSE