STERIPleat PES – Membrane filter cartridge

STERIPleat PES membrane cartridges use a naturally hydrophilic PES membrane for bacteria removal/reduction. These filter cartridges are used for bioburden reduction in a range of beverage and pharmaceutical applications.

  • Specifications
  • Downloads
Applications
- Sterile filtration, WFI
- Pharmaceutical, Cosmetics, Fine chemicals, Electronics
- Point of use
- Beer
- Wine
- Beverages
Materials
Filtration media: Hydrophilic Polyethersulphone membrane
Support & drainage layer: Polypropylene
Core, cage & end fittings: Polypropylene (Optional reinforced PP end caps for sterilisation/sanitisation)
Gaskets & O-Rings
Ethylene Propylene , FEP encapsulated, Silicone, Viton, Nitrile, PTFE (DOE only)
Operating
Max. operating temperature
80°C
Micron ratings
0.03, 0.1, 0.2, 0.45, 0.65, 0.8, 1μm
Available lengths
Standard cartridge: 2”, 5”, 10”, 20”, 30”, 40” (64, 125, 251, 510, 757, 1016mm)
Junior cartridge: 2”, 5” (63, 122mm)
Outer diameter
Standard cartridge: 68.50mm
Junior cartridge: 56mm
Typical filtration area
Standard cartridge: 0.65 - 0.75m2 per 254mm (10” element)
Sterilisation
Steam or autoclave: 121°C for 60mins (240 cycles)
135°C for 30mins (25 cycles)
Hot water: 90°C for 30mins (0.2bar Δp max)
Chemical sanitisation: Peroxyacetic acid, Hydrogen peroxide, Sodium Hypochlorite, Peracetic acid (at industry
standard concentrations)
Material compliance
FDA approved components
USP Class VI-121ºC Plastics Test
BSE/TSE
Tested for extractables