Cartridge Filters
Siga Filtration offer cartridge filters for applications in industrial, process, food, beverage, and pharmaceutical applications. The standard range includes filters in Polypropylene, Nylon, Polyester, glass fibre, PES, PTFE, PPS, Cotton, and Stainless Steel. These elements can be supplied in many different lengths, diameters, and micron ratings for both coarse and fine filtration. Reusable Stainless steel and plastic elements provide a cost-effective and environmentally friendly solution to filtration. Our food & beverage filter elements are manufactured from food-safe materials and meet or exceed the requirements of current EU regulations.
-
Depth Filter Cartridges
Depth Filter Cartridges
Depth filter cartridges are used to reduce particulate load before fine filtration (polishing) or to keep the recirculating process fluids clean. These are excellent filters for general use and can be used for industrial and food applications with our FDA approved media. Available materials (Nominal or Absolute): 1) Polypropylene 2) Nylon 3) Polyester 4) Cotton 5) Glass fibre 6)PPS
View Details
-
Pleated Filter Cartridges
Pleated Filter Cartridges
Pleated filter cartridge elements are used in polishing applications for precise removal of particulates in process, food, pharmaceutical, and cosmetics. Siga Filtration's high-quality pleated filter cartridges can be used at the end of line for fine filtration or for protection of downstream filtration equipment like membranes.
Polypropylene Filter Elements
Our comprehensive range of industrial pleated filter cartridges is available in Polypropylene, Glass Fibre and Polyester media in lengths of up to 40″ and absolute removal ratings from 0.2 to 50 micron. More details of each pleated filter cartridge we offer can be accessed by clicking below, or complete and submit our enquiry form at the bottom of this page if you'd like to speak to our team about your pleated filter cartridge requirements.View Details
-
Membrane Filter Cartridges
Membrane Filter Cartridges
Membrane filter cartridges are used as a final filtration step for sterile filtration or high efficiency filtration of liquids and gases. STERIPleat Series membrane cartridges by Siga Filtration are manufactured in clean room environment and are fully traceable with batch and serial numbers. All STERIPleat membrane filter cartridges are manufactured from FDA approved components and suitable for food contact. These membranes can be used for food, beverage and pharmaceutical applications.
View Details
-
Oil Removal Cartridges
Oil Removal Cartridges
CLARISorb HC filter elements remove dissolved and dispersed hydrocarbons from water, absorbing three times their own weight.
View Details
-
Stainless Steel Filter Cartridges
Stainless Steel Filter Cartridges
Stainless steel cartridges provide a number of uses in the process, food & beverage industry. Engineers are often faced with the challenge of chemical compatibility of filtration materials with their process fluid. Stainless Steel has broad chemical compatibility and can replace more common polymeric elements. Our stainless steel elements can be supplied in cylindrical, or pleated construction with mesh, fibre or sintered powder media to meet application requirements. Stainless steel filter cartridges can be cleaned and reused depending on application and type of impurities. Cleaning is usually achieved by pyrolysis, chemical dissolution, ultrasonic baths or pressure jetting. Reusable stainless steel elements can significantly reduce the cost of consumables. These elements have a much higher differential pressure resistance as compared to polymeric elements which makes them a good choice for the filtration of high viscosity liquids. High temperature resistance is another benefit of stainless steel elements and these filters can provide reliable filtration in high temperature applications. Siga Filtration can supply stainless steel filter cartridges manufactured from 304 or 316L grade stainless steel in absolute micron ratings from 3 – 1000 micron. These filters can be supplied in cylindrical or pleated construction in metal fibre, sintered powder, or mesh type media. All elements are available in a range of end caps as well as BSP threaded connections. Our stainless steel elements are suitable for high temperature, corrosive, high viscosity and food & beverage applications. In addition to our standard range, we can can supply elements with non standard diameters and lengths to replace elements by other manufacturers.
View Details
