CARBON POLISHING (ORGANICS REMOVAL)
KEMISorb carbon elements provide a high surface area carbon block for effective removal of organics due to brightener breakdown and drag in. These elements come with a 5 micron prefiltration layer to avoid contamination of Carbon block. Carbon polishing of plating solutions will reduce dull deposits and pitting. These are usually installed after the particulate removal filters. These elements can be used with our SFPP Polypropylene filter housings for a complete solution.
KEMISorb filter elements feature a high surface area sintered carbon block and a built in prefiltration layer for effective sediment removal. These elements are used for the reduction of Chlorine, Ozone and colour from water, alcohols, plating baths and solvents. A highly rigid carbon block eliminates fluidising, channelling or bypass as compared to conventional granular carbon elements. All polymeric construction provides excellent chemical resistance. All KEMISorb elements are traceable with a unique identification embossed on every cartridge. Find out more about our food & beverage filters.
View Details Enquire Now
This SFPP Polypropylene Filter Housing provides a cost-effective solution for applications where stainless steel is not suitable. These housings are manufactured from Polypropylene and can take up to 7 off 40″ cartridges for a flow capability of up to 35 m3/hr.
- Material: Polypropylene
- No of cartridges: 1, 3, 4, 6 or 7
- Length of cartridges: 10″, 20″, 30″ or 40″
- End cap: DOE, Code 8 (222/spear) or Code 3 (222/flat)
- Max. operating pressure: 6 bar at 30°C
- Max. operating temperature: 60°C at 3 bar
Single cartridge filter housing for standard (64 – 69mm OD) cartridges in lengths of 251 mm or 508 mm . Available in Polypropylene (Opaque) or styrene-acrylonitrile SAN (transparent) sump.
- Cartridge diameter: 2 1/2″ to 2 7/8″
- Cartridge size: 251 or 508 mm DOE or 213 internal o ring
- Material: PP I PP/SAN
- operating pressure: 8.5 bar
- operating temperature: +50°C
- NSF 42 Certified
