STERIPleat Nylon Membrane Filter Cartridge

STERIPleat Nylon cartridges are based on a naturally hydrophilic nylon membrane. When combined with quality all-polypropylene cartridge components and high integrity manufacturing techniques, the nylon membrane provides a high strength, long life cartridge of consistently precise particle retention across a wide range of particle sizes. STERIPleat Nylon cartridges benefit from high protein binding characteristics of nylon membranes. They are also highly resistant to integrity failure caused by steam sterilisation.

Datasheet Send Enquiry

STERIPleat Nylon Membrane Filter Cartridge
Applications
Biopharmaceuticals
Electronics
Semiconductors
Fine chemicals
Beverages
Features
Media Hydrophilic Nylon 6,6 Membrane
Microbial removal Validated for bacterial removal according to HIMA guidelines and ASTM F838-05.
Log reduction value >7
Integrity Each module is individually integrity tested and flushed with pure water.
Traceability Individual & batch identification with serial number.
Controlled manufacturing Manufactured in ISO clean room environment.
Specifications
Micron ratings 0.03, 0.1, 0.2, 0.45μm
Lengths 254mm, 508mm, 762mm, 1016mm (10”, 20”, 30”, 40”)
Diameter 70mm (2.8”)
Effective filtration area 0.69m2 (7.4ft2) per 254mm (10” module)
Construction
Filter membrane Nylon 6,6
Membrane support Polypropylene
Drainage layer Polypropylene
Inner core Polypropylene
Outer cage Polypropylene
End fittings Polypropylene
Support ring Stainless Steel
Gaskets & O-Rings FDA approved Ethylene Propylene , FEP encapsulated, Silicone, Viton, Nitrile
Operating Temperature  
Maximum continuous 60°C (140°F)
Sterilisation
Sterilisation In situ steam 30 x 25 minute cycles at 125°C (257°F)
Maximum Differential Pressure
Normal Flow direction at:
20°C (68°F) 6.0bar (87psi)
80°C (176°F) 4.0bar (58psi)
100°C (212°F) 3.0bar (44psi)
120°C (248°F) 2.0bar (29psi)
Reverse flow direction at:
20°C (68°F) 2.1bar (30psi)
80°C (176°F) 1.0bar (15psi)
100°C (212°F) 0.5bar (7psi)
Material conformity
Materials The bio-safety of all materials is assured by FDA approval, USP Class VI and meets or exceeds the latest EC Directives for Food Contact.

  • Overview
  • Process Filtration
  • Our Customers
  • Industrial & Food Filter Bags
  • Enquiry Today
  • Process Filtration
  • Our Customers
  • Stainless Steel Filter
  • Enquiry Today